Pyramix X - Default Settings

CD/SACD Mastering and Album Production : Default Settings
26 - 602
Default Settings
CD Offset default parameters and ISRC default parameters are set in the Settings > All Settings > Application >
CD/SACD page.
CD Offset default parameters
These parameters are used when the offset of a PQ marker is set to zero and you enable them by ticking the boxes.
CD Start Offset Enabled
CD Index Offset Enabled
CD Stop Offset Enabled
Offset values can be typed and/or adjusted using the increment decrement buttons.
Offset before first Start
Negative offset applied to the first PQ start marker only.
Offset before Start
Negative offset applied to all PQ Start markers except the first one.
Offset after stop
Positive offset applied to PQ Stop marker except the last one.
Offset after last stop
All Settings Application CD/SACD Page