Pyramix X - Mixer Presets

Mixer : Mixer Presets
10 - 281
• POW-r: Is essentially a combination of dither technologies and settings
• POW-r 2: Similar to MT-r Triangular with high pass noise shaping
• POW-r 3: Similar to MT-r Triangular with equal loudness noise shaping
Mixer Presets
Mixer Presets can be saved in a user folder or added to the main Mixer Preset list either for the current user or all
users.
Default Mixer
To Save the current Mixer setup as the default Mixer, right click on the Mixing Console and select Memory > Pre-
sets > Store > Default.
Storing New Mixer Presets
To add a preset to the main list of available Mixer presets I.e. the list which appears when starting a new project,
right click on the Mixing Console, select Memory > Presets > Store > New… and enter a name for your Mixer Pre-
set. If the Global check box is checked then the preset will be available for any user logged on the current
machine, if not the preset will be available only for the user that created the new preset.
Removing Mixer Presets
To remove a preset from the main list, right-click on the Mixing Console, select Memory > Presets > Remove >
(preset you wish to remove). The Remove Preset dialog box appears with OK and Cancel options.
Saving / Loading Mixer Presets
Mixer Presets can also be stored in Windows folders. Right-click on the Mixing Console, select Memory > Save. A
Windows Explorer window opens enabling the current Mixer Preset to be named and saved to any Windows
folder. Similarly, selecting Memory > Load enables a Mixer Preset to be loaded from any Windows folder.