Mixer : Peak Logger
10 - 282
Strip and Bus Tools
In a multi-channel strip the clicking the show/hide Routing button displays the channel routing buttons. There
are as many routing buttons as there are channels in the strip. (Up to 24) Where there are more than 8 channels, up
to three rows of 8 routing buttons will be present. Strip and Bus Tools affect all channels whose routing buttons
are lit blue. In Mono and Stereo strips the routing buttons are on by default. In MCS strips only channels 1 & 2 have
their routing buttons on by default.
If more than one instance of Strip or Bus Tools is used in the strip the routing buttons allow, for example, different
settings to be applied to Front L-R and Rear L-R etc.
Note: The maximum number of channels a single instance of Strip & Bus Tools can operate on is
8. If you need to affect more channels a second instance will be required.
Peak Logger
The Pyramix Mixer is equipped with a Peak Logger. This has obvious applications in Mastering.
Click on the Gain Pop-up to access the Gain options:
Show/Hide Routing
Routing Buttons
To Next Page
Loading...