Pyramix X - Meter Bridge

Meter Bridge : Meter Bridge
12 - 334
Meter Bridge
Scope
Pyramix has a dedicated Meter Bridge window.
The Meter Bridge can present a meter display for every Input strip and Bus present in the current Mixer and exter-
nal Machine configured in the Monitor : Externals page.
The Meter Bridge also indicates the currently selected mixer strip with a yellow outline, any strips in Record Ready
condition with a red outline, whether any strips are Muted or Soloed and optionally shows Ramses Groups and
Fader Automation mode per strip.
Meter ballistics and alignment are adjustable either manually or via presets.
You do not have to use the Meter Bridge but, especially when used with Ramses MSC, it offers flexible metering
in one place. With complex Mixers and routing, the Meter Bridge can help to keep things logical.
General Purpose Buses
The new General Buses are supported for Mix and Aux Buses, Groups are not supported currently.
Note: The Meter Bridge is displayed “Always On Top” of other windows.
Meter Bridge Switch
The Meter Bridge Window is enabled/disabled via View > Windows / Tools > Meter Bridge or from the Toolbar
Icon or by mapping the function to a short-cut key.
Meter Bridge Switch