Automation : Mixer and Plug-in Snapshots
14 - 419
Mixer and Plug-in Snapshots
Note: Mixer Snapshots as described here use the dynamic automation mechanism.
Mixer Snapshots
Snapshots of the entire state of the mixer surface may be easily and quickly saved and recalled.
Saving Mixer Snapshots
To save a Mixer snapshot hold down Alt and Shift then Click anywhere on the Mixer surface and drag to a user
library. A new item of the type Mixer Snapshot will appear in the library. The snapshot is named Mixer Snapshot
by default. To accept this name just hit Enter. Otherwise, type a suitable name then hit Return.
Recalling Mixer Snapshots
To recall a mixer snapshot simply click on it in the library, drag it over the mixer surface and release. All parameters
will be reset to the values stored in the snapshot.
Note: A Mixer Snapshot includes all Plug-in Parameters.
Effects Snapshots
Effect Settings can be easily stored and recalled by dragging them to/from libraries.
Creating Effects Snapshots
Hold Alt + Shift, then click and drag from a Plug-in window to the library where you want to store the settings,
then release. A new item, of the type Mixer Snapshot, is stored in the library. The snapshot is given the name of
the plug-in by default. The new item is automatically highlighted so, if you wish to change the default name, sim-
ply type the new name and hit Enter to confirm. The name of the snapshot can be subsequently changed by click-
ing on the name in the library, then entering the new name.
To Next Page
Loading...