Mixer : Mixer Components
10 - 219
Mixer Components
Input Strips
Mixer Input Strips associated with Tracks (the main number top-left in the Track Header) are fed by and control the
monitor output of the Tracks. The Mixer Strip Channel Live (physical) or Internal Return Bus Input goes direct to
the associated Track. When a strip has no associated Track it is fed by and controls the Live (physical) or Internal
Return Bus input assigned to it.
When the strip has an associated Track, the Track output is automatically switched between input and playback
output depending on transport mode, the monitoring setting in the Track header and the setting of the Settings
> All Settings > Application > Playback/Record : Auto-monitoring option, European Monitoring (all tracks
turn to INPUT on stop) or US Monitoring (only Record Ready tracks turn to INPUT on stop).
Note: When strip channels have an associated Track NONE of the strip controls, fader, mute,
affect the signal fed to the Track input. The Record feed can be Pre or Post Effects, selected from
the Strip pop-up menu.
Mixer Input Strips have the same functions as the input strips of any standard mixing console providing level con-
trol, pan, mute, etc.
The following types of input strips are available:
Mono
Mono - Direct Monitoring
Stereo
Stereo - Direct Monitoring
MS
MS - Direct Monitoring
Multi-Channel Strip)
To Next Page
Loading...