Effects and Plug-Ins : Flux
13 - 384
Algorithmix
DeNoiser
DeScratcher
DeNoiser + DeScratcher, Restoration Suite
ReNOVAtor
Overview
The ReNOVAtor™ plug-in for the Pyramix rendering interface is an impressive weapon in the battle for cleaner
recordings. Coughs, chair scrapes even mobile phone tones are all in its sights.
The ReNOVAtor™ Plug-In enables audio data in the frequency domain to be modified simply and quickly. These
modifications include interpolation of selected areas over the time- and/or frequency line as well as gain modifica-
tions. The interpolation can also be restricted to certain gain ranges within the selected area, which is very useful if
only a certain part of the data needs treatment (e.g. one specific harmonic etc.) which cannot otherwise be
selected. The ReNOVAtor™ window is fully resizable for optimum compatibility with all screen resolutions.
Vincent Burel
The VB plug-ins are bundled in the Pyramix 64-bit installer and require valid keys to operate. In the absence of the
relevant keys they operate in demo mode. (Plug-ins are bypassed every 30 seconds.)
Aphro V1 Reverb / Aphro V1.5 Reverb
Aphro-V1.0/Aphro V1.5 are real time Digital Effects Processors. Elements of a high quality effects processor series
called Aphro-Vx, Aphro-V1 and V1.5 are specially created to simulate sonorous atmosphere and room effects, in a
realistic way.The handling philosophy is made simple and practical thanks to a wide range of presets, which
requires the user to select a preset matching the best desired effect, and then to use the different interfaces in
order to adjust it, according to his requirements. Grouping parameters by theme, gave us the idea of creating a
modular and ergonomic user interface.
VB Packs
• VB C10-Multiband Compressor (C10-D10 - Limiter / C10-DXD)
• VB Compressor (Red-Blue Compressor and Decompressor / MultiChannel Compressor)
• VB EQ-Pro Pack (EQPro - G3/G4 EQnotch - G3/G4
• VB Limiter (C-Limiter)
• VB Measure Pack (VU-Meter / Oscilloscope / Spectrum Analyzer)
• VB Special Fx (Chorus / MultiTap)
• VB Stereo Management (Stereoman / MonoSwitcher)
• VB Striptool V1* / V2 / V3)
• VB Tone-X Pack (Tone-Param / Tone-Shelf / Tone-4)
* VB Striptools V1 plug-in is free of charge for all users. (32-bit or 64-bit)
Note: Having the VB plug-ins installed can result in a 10 second (approximately) delay when
launching Pyramix. If you do not wish to install the VB plug-ins along with Pyramix 9.1 or higher
then select Custom when launching the Pyramix installer and under the VBAudio plugin entry
select: This Feature will Not be Available.
Cedar Audio Restoration Suite for Pyramix
Cedar’s range of restoration tools need no introduction here. The following processes are available for Pyramix:
• Cedar dehiss for Pyramix
• Cedar declick for Pyramix
• Cedar manual declick for Pyramix
• Cedar decrackle for Pyramix
To Next Page
Loading...