Mixer : 3D Panning Control Bus Window
10 - 262
LFE Sets the LFE level.
LFE2 Sets the LFE level to the second Sub-woofer. (Only shown when present in the
Room Configuration.)
Divergence Type Clicking in the field cycles through 1D, 2D and 3D
1D Divergence is applied Left and Right.
2D Divergence is applied Left, Right, Front and Rear.
3D Divergence is applied Left, Right, Front, Rear, Top and Bottom.
Virtual Pan Law Clicking in the field switches between Sin/Cos and Square Root.
Sized Pan Attenuation Only applicable to Sized room models. Enables the effect of distance on the atten-
uation to be exaggerated or reduced by a factor of 5 times. Central position means
default attenuation is 1/d, moving the parameter to the right exaggerates the
effect of distance, moving the parameter to the left reduces the effect of distance.
Stereo Source
All of the above PLUS:
Rotation LR Rotates the image in the horizontal plane. No Change in height.
Rotation FR Tilts / Rotates the image in the vertical plane Left and Right. Center is fixed.
Rotation BT Tilts / Rotates the image in the vertical plane from Front to Back
Source Size
Dual Source Mode Clicking on the field cycles through:
Balance
Single Pan Pans the stereo source as a mono source.
Dual Pan Rotation and Source Size controls are hidden and replaced
by:
2nd Left/Right
2nd Front/Rear
2nd Bottom Top
2nd Divergence
Thus in Dual Pan mode the two source channels are dealt with independently.
Note: The 3DConnexion Space Navigator and SpaceMouse Pro mice are supported for pan-
ning. Please follow the configuration guide which may be found here:
https://confluence.merging.com/display/PUBLICDOC/3DConnexion+Mouse+-+Configuration+Guide
To Next Page
Loading...