Menus : Project
28 - 662
Load Change EDL & Reconform Allows a so-called “Change EDL” generated from a “State 1 EDL” and a “State 2
EDL” to be loaded. Cues are rearranged within the current project to reflect the
change from State 1 to State 2
Detect Picture Change & Reconform You can use Pyramix to perform a Reconform from two Video Projects.
After loading the Video Projects select this option to begin the Reconform process.
Ovation Only Applicable to Ovation Systems. Please see the Ovation User Guide for details.
Render Render the project or current selection to a new Media File
Mix Down Opens the Mix Down dialog to Mix the Project or current Selection down to a new Media
File or files through the Mixer
Generate CD Image / SACD Edited Master Opens the Generate CD Image / SACD Edited Master Dialog:
DSD options are only available for DSD Projects
SACD Cutting Master Wizard Only applicable to SACD systems. Please see the SACD User Guide.
Surround Post-processing Enables the current composition to be encoded in different Surround format such as AC3
or DTS (if the appropriate optional encoder plug-in is installed)
DSD Render Enables Timeline edits (Fades/Gain/Cuts) to be processed. Applies to DSD64, DSD128,
DSD256 and DXD Projects. Also applies to 352.8 kHz PCM projects containing only DSD
material. For DXD the sampling rate must be specified. With DSD projects the sampling
rate is forced to the Project rate. Media Phase Invert is supported.
Note: The DSD Render function does NOT apply any Envelope changes. Gain changes, fades
and Phase invert are applied.
Share Mixing Console Activates or terminates Sharing the current Mixing Console with other Projects.
Exit To quit the application, choose Exit from the File menu. If there have been changes since
the last time you saved the project, the system will prompt you to save your changes
Note: The Stretch / Pitch menu selection requires the optional Prosoniq MPEX.
To Next Page
Loading...