Menus : Machines
28 - 700
Locator >
Goto Locator 1 Goto Locator 1
Goto Locator 2 to 9 omitted
Goto Locator 10 Goto Locator 10
Set Locator 1 Set Locator 1
Set locator 2 to 9 omitted
Set Locator 10 Set Locator 10
Controllers>
Offline Controllers Toggle Controllers On/Off line
Jog-Wheel Mode - Jog
Jog-Wheel Mode - Shuttle
Jog-Wheel Mode - Loop repeats a short loop, starting at the cursor position
Jog-Wheel Mode - Navigate Navigate is silent jog mode
Jog-Wheel Mode - Zoom
Jog-Wheel Mode - Track Size
Jog-Wheel Mode - Volume
Jog Wheel Mode - Pitch Varies the pitch in normal speed playback. Clockwise increases, anti-clock-
wise decreases. Range is limited to -25% to +25%.
Jog-Wheel Mode - Off
Jog-Wheel Listen - Mix Listen to mix out when Jog is active
Jog-Wheel Listen - Selection Listen only to Tracks included in the current Selection
Jog-Wheel Fine Change jog-wheel ‘gearing’ to the sensitivity factor set in Settings > All
Settings > Application > Jog/Chase : Fine Jog sensitivity factor (Default
0.25) I.e. a quarter of nominal sensitivity.
E.g. if nominal = 1.00 seconds per revolution then Fine will be a quarter of a
second per revolution.
Auto Show Plugins When selected Plugins parameters windows are automatically opened
when selected on the remote controller.
To Next Page
Loading...