Settings : Hardware
29 - 713
Directory : The list shows a real-time view of the Apple MIDI connections available on the net-
work.
E.g. Horus/Hapi, Pyramix system (another v9.1 or later if available on the network,
any Apple MIDI port available on the network.
Hovering the mouse cursor over an entry in the list displays its IP address and port
number.
>> button Adds a selected directory entry to the Participants list.
<< button Removes a selected Participant from the list.
Participants : OK will appear to the right of an entry in the list when connected.
NOK is shown to the right of an entry in the list when not connected.
Note: When a MIDI connection is configured and is providing MTC, the MIDI TimeCode Reader is
displayed in the Pyramix Transport panel under Available Machines. Pyramix will output the
MIDI TimeCode on all the configured MIDI connections.
Note: USB Sync users will find their USB Sync MIDI ports under the DIN MIDI section. Please
ensure the USB Sync Board is set to MIDI mode. Check this in the USB Sync Control Panel.
To Next Page
Loading...