Appendices : Appendix II VS3 Control Panel
31 - 784
Platform
This drop-down list determines which processing platform mode will be used. Dependant on the options installed
these may include MassCore and Native - ASIO.
Core Allocation
Note: This setting is only available in MassCore Systems and only when the MassCore SMP key is
present. This setting applies to ALL applications.
The slider enables the number of processor cores dedicated to MassCore to be varied. The numbers shown vary
according to the number of cores available on the specific system and on whether Hyperthreading is switched on
in the BIOS.
Latency
These options are only available when MassCore is installed and chosen as the Platform. Please see: Pyramix
Latency Modes for MassCore on page 38
I/O Selection
Only present when Native - ASIO is the selected Platfom. The drop-down list offers the choice of all ASIO devices
present on the system.
VS3 Control Panel Window Native - ASIO Platform
To Next Page
Loading...