Radwin 2000+ SERIES - Page 90

RADWIN2000+SeriesUserManual Release4.2.40 6‐7
ActivatingtheRT‐A(HBS)
righthandselectorwheel
Observethattherighthandspin‐wheelisnolongerdisplayed.Hadyou
leftOtherenabled,youcouldhavechosenafrequencybyworkingthroughthose
availablein5MHzincrements.
8. ChoosetherequiredChannelBandwidth:
TheRADWIN2000+Serie shasDynamic BandwidthSelection:Ifyouchoosethe
maximumvalueavailableforthebandwidth,thelinkma ydynamicallyswitch
betweenthemaximumvalueandvaluesaslowas20MHztoensur ethebest
FortheRADWIN2000C+,RADWIN2000D+,andRADWIN2000i,choose
atleast40MHzChannelBandwidthtoenablethesupportednet
aggregateca pacity.