Radwin 2000+ SERIES - Page 91

RADWIN2000+SeriesUserManual Release4.2.40 6‐8
ActivatingtheRT‐A(HBS)
throughput.Selecting 20,10or5MHzCBWsetsyourchoiceasthefixedCBWfor
thelink.
9. UsingACS:
• Choosing40or80MHz(ifavailable)CBWautomaticallyenablesACS.Allthatyou
maydoisremovesomeofthechannels:
• ForCBW20MHzorless,enableACSbycheckingtheAut
omaticChannelSelection
box:

DonotuseACSpriortoantennaalignment.