PRINTING SECTION
C262/C265 3-102 SM
[C]: White cam ( x 1)
[D]: Cover ( x 1)
1. Turn the pressure cylinder clockwise 80 degrees, so that the positioning hole
[E] in the side of the pressure cylinder is at the top.(The flat part of the pressure
cylinder faces towards the upper right, as shown.)
2. Remove the screw and flip over the stopper [F] from left to right.
3. Put the right hand into the side trapezoid hole (for removing lower wrapping
jams), and support the bottom of the cylinder.
C262R106.WMF
C262R108.WMF
[C]
[D]
[E]
[F]
To Next Page
Loading...
