MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
C262/C265 3-130 SM
- From the paper exit side -
6. Secure the main drive unit [B] on the machine rear frame ( x 2).
NOTE:
1) Install the two screws temporarily, because you must tighten them in
step 8.
2) When installing the main drive unit, align the elongated hole in the
drive disk [C] with shaft [D] above it, as shown.
C262R132.WMF
C262R185.WMF
[B]
[C]
[D]
To Next Page
Loading...
