MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
C262/C265 3-134 SM
18. From the rear, loosen the two screws [D] to allow the pressure cylinder drive
gear to turn freely.
NOTE: Do not remove the screws.
19. From the operation side of the machine, insert the two positioning shafts [E]
(special tools) to secure the pressure cylinder and printing pressure cams in
their home positions.
z Pass one shaft through the pressure cylinder as shown.
z Pass the other shaft through the two printing pressure cams as shown.
C262R137.WMF
C262R138.WMF
[D]
[E]
To Next Page
Loading...
