SERVICE PROGRAM MODE
C262/C265 5-22 SM
4: 2-5 (Thermal Head Energy Saving)
If Ink Temp Control – Black (SP2-5-1) or Color (2-5-11) are switched on, the
energy supplied to the thermal head will depend on the temperature of ink
measured by the thermistor in the drum, as shown by the formulas in the table
below. This setting can be adjusted for Black and Color separately.
Thermal head energy settings used in the formulas:
[Y]: Standard
Black (SP2-5-3): 7%
Color (SP2-5-13): 7%
[Z]: Economy Mode 1
Black (SP2-5-4): 17%
Color (SP2-5-14): 17%
[Z]: Economy Mode 2
Black (SP2-5-5): 27%
Color (SP2-5-15): 27%
[T]: The temperature of the ink
Drum
Ink Temp
Control
(SP2-5-1, 11)
Mode Less than 20 ºC 20 ºC or more
Standard -Y% -(Y+(T-20) x2)%
The limit is 23%
Economy 1 -(Y+Z)% -(Y+(T-20) x2+Z)%
The limit is 40%
ON (Default)
Economy 2 -(Y+Z)% -(Y+(T-20) x2+Z)%
The limit is 50%
Standard -Y%
Black/Color
OFF
Economy 1, 2 -(Y+Z)%
5: 2-6-1 (APS/A5 Size Detection)
This determines how the machine behaves if the APS sensors cannot detect the
original because it is too small.
0: No - No original detected
1: Yes - A5 assumed
Default: 0: No
To Next Page
Loading...
