Ricoh LDD280 - 9: 6-9 (Misfeed - Paper Feed Pressure); 10: 6-10 (Double Feed - Separation Press)

SERVICE PROGRAM MODE
SM 5-45 C262/C265
Service
Tables
8: 6-6 (MTF filters)
A stronger filter leads to a sharper image, but moiré can become more apparent.
Refer to the following table for the relationship between this SP mode value and
filter strength (the relationship is not linear).
Value Strength of Filter
8 X 4
7 X 2
6 X 1
5 X 1/2
4 X 1/4
3 X 1/8
2 X 1/16
1 X 1/32
0 0
NOTE: This setting is effective only if SP6-59 (filter corrections) is set to “MTF
filters”
9: 6-9 (Misfeed – Paper Feed Pressure)
These SP modes determine the paper feed pressures that are automatically
applied during paper feed. The feed pressure used by the machine is controlled by
the following items:
• The paper type selected by the user (normal, thick, thin, special, user 1, user 2),
• The frequency at which non-feeds are occurring (this estimate can be input by
the user).
0: Lowest feed pressure
6: Strongest feed pressure
10: 6-10 (Double Feed – Separation Press)
These SP modes determine the paper separation pressures that are automatically
applied during paper feed.
The separation pressure used by the machine is controlled by the following items:
• The paper type selected by the user (normal, thick, thin, special, user 1, user 2),
• The frequency at which double-feeds are occurring (this estimate can be input by
the user).
0: Lowest separation pressure
6: Strongest separation pressure