INSTALLATION PROCEDURE
SM 1-25 C262/C265
Installation
3. Attach a color indicator decal [A] to the drum case. The decal must be the
same color as the ink in use.
4. Remove the drum unit.
5. Leave the master wrapped around the removed drum, to protect the drum from
dust and from drying.
NOTE: If the user is concerned about security, make a new blank master to
wrap around the drum. At this time, the user’s master (now on the
drum) will go into the eject box, which is locked.
6. Keep the removed drum unit in the drum case.
7. Install the drum unit.
NOTE: The color drum indicator on the operation panel stays lit when a drum
is installed in the machine.
8. Remove the ink cartridge cap.
9. Insert the ink cartridge in the ink holder.
C262I023.WMFF
[A]
To Next Page
Loading...
