146
Input/output and effect settings (In/Out Routing)
■
Procedure ....................................................................................................................
1.
Press [INPUT] or [USB AUDIO] so its indicator is lit.
The Input screen or USB Audio screen will appear.
2.
Press [EFFECTS] so its indicator is lit.
The In/Out Routing screen will appear.
(Performance mode)
(Patch mode)
3.
Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
4.
Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
5.
Press [CURSOR/VALUE] to highlight the value.
6.
Turn [CURSOR/VALUE] to edit the value.
7.
When you’ve finished editing, press [CURSOR/VALUE].
Press [EXIT] or [EFFECTS] to access the In/Out Routing
screen.
■
Menu screens when editing In/Out Routing ...................................................................
If you’re in a screen that’s related to the In/Out routing,
pressing [MENU] will bring up the Effect Switch screen.
The Effect Switch screen is structured as shown in the
illustration at right. You can switch between screens by
turning [CURSOR/VALUE] to the right or left.
Press [MENU] once again to return to the previous screen.
Parameter
Value Explanation
Input Effect
(Input Effect Switch)
OFF, ON
Specifies whether input effects will be used (ON) or not used (OFF).
Write
(System Write)
Saves the current settings as system settings (p. 150).
System
Press [CURSOR/VALUE] to access the System screen (p. 176).
Utility
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
Demo Play
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
SRX Info
(SRX Information)
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Version
(Version Information)
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
SonicCell_e.book 146 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
