sysdat.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
2-29
Nur für den internen Gebrauch System Data
HiPath 3000
Boards for Tie Trunk Traffic
3 The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3, “System-Specific
Capacity Limits for HiPath 3000, HiPath 5000”.
Table 2-12 Tie Trunk Traffic Boards for HiPath 3550
Board
Name
Capacity Coun-
try
Type/Description
Ports per board
B channels per board
Max. number of
boards per system
ROW
USA
HXGS3 2 8 3 x x HG 1500 board for connecting the HiPath 3550 system di-
rectly to a local data network (Ethernet).
STLS2 2 4 #
1
1 The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3, “System-Specific
Capacity Limits for HiPath 3000, HiPath 5000”.
x - Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no
feeding) on the same board is possible.
STLS4 4 8 #
1
xx
TS2N 30 30 1 x - Board for primary rate access; can be used for tie trunk traf-
fic.
In HiPath 3000/5000 V5.0 and later, the B channels in the
TS2N board are subject to license. Consequently, the TS2N
boards (S30810-Q2913-X300) have been assigned a new
hardware identification code. The new code prevents the
board from being used in earlier versions. Functionality and
layout of the board have not been changed.
To Next Page
Loading...
