Siemens MCP 398C Function Manual

Detailed Description
2.4 Acceleration (B2)
Basic logic functions: NC/PLC interface signals (Z1)
70 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
DB31, ...
DBX60.7
Position reached with exact stop fine
Edge evaluation: no Signal(s) updated: cyclic
Signal state 1 or
edge change
0 → 1
Refer to DB31, ... DBX60.6 (position reached with exact stop coarse).
Signal state 0 or
edge change
1 → 0
Refer to DB31, ... DBX60.6 (position reached with exact stop coarse).
Signal irrelevant for
...
Rotary axes that are programmed as rounding axes.
Corresponding to .... MD36010 $MA_STOP_LIMIT_FINE (exact stop fine)
2.4 Acceleration (B2)
No signal descriptions required.
2.5 Diagnostic tools (D1)
No signal descriptions required.

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English