Basic logic functions: Travel to fixed stop (F1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
49
Data lists
5
5.1 Machine data
5.1.1 Axis/spindlespecific machine data
Number Identifier: $MA_ Description
36042 FOC_STANDSTILL_DELAY_TIME Delay time 0 monitoring with FOC and FXS
37000 FIXED_STOP_MODE Travel to fixed stop mode
37002 FIXED_STOP_CONTROL Special function when traveling to fixed stop
37010 FIXED_STOP_TORQUE_DEF Default setting for clamping torque
37012 FIXED_STOP_TORQUE_RAMP_TIME Virtual time until reaching the new clamping torque
when traveling to fixed stop
37020 FIXED_STOP_WINDOW_DEF Default for fixed stop monitoring window
37030 FIXED_STOP_THRESHOLD Threshold for fixed stop detection
37040 FIXED_STOP_BY_SENSOR Fixed stop detection via sensor
37050 FIXED_STOP_ALARM_MASK Enabling the fixed stop alarms
37052 FIXED_STOP_ALARM_REACTION Reaction to fixed stop alarms
37060 FIXED_STOP_ACKN_MASK Monitoring of PLC acknowledgments for travel to fixed
stop
37070 FIXED_STOP_ANA_TORQUE Torque limit on fixed stop approach for analog drives
37080 FOC_ACTIVATION_MODE. Status of activation of the modal function FOC