Basic logic functions: Transverse axes (P1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
19
Data lists
5
5.1 Machine data
5.1.1 Channelspecific machine data
Number Identifier: $MC_ Description
20050 AXCONF_GEOAX_ASSIGN_TAB[n] Assignment of geometry axis to channel axis
20060 AXCONF_GEOAX_NAME_TAB[n] Geometry axis name in channel
20100 DIAMETER_AX_DEF Geometry axis with transverse axis function
20110 RESET_MODE_MASK Definition of control basic setting after powerup and RESET /
part program end
20112 START_MODE_MASK Definition of the control basic settings for NC start
20150 GCODE_RESET_VALUES[n] Reset G groups
20152 GCODE_RESET_MODE[n] G code basic setting at RESET/end of parts program
20360 TOOL_PARAMETER_DEF_MASK Definition of tool parameters
20624 HANDWH_CHAN_STOP_COND Definition of the behavior of traveling with handwheel
27100 ABSBLOCK_FUNCTION_MASK Parameterize block display with absolute values
5.1.2 Axis/spindlespecific machine data
Number Identifier: $MA_ Description
30460 BASE_FUNCTION_MASK Axis functions
To Next Page
Loading...
Need help?
General
