Data lists
5.1 Machine data
Basic logic functions: Axes, coordinate systems, frames (K2)
150 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Number Identifier: $MM_ Description
9451 9451 MM_WRITE_ZOA_FINE_LIMIT Limit value for offset fine
9459 PA_ZOA_MODE Display mode of zero offset
5.1.2 NC-specific machine data
Number Identifier: $MN_ Description
10000 AXCONF_MACHAX_NAME_TAB Machine axis name
10600 FRAME_ANGLE_INPUT_MODE Input type for rotation with frame
10602 FRAME_GEOAX_CHANGE_MODE Frames and switchover of geometry axes
10610 MIRROR_REF_AX Reference axis for FRAME element mirroring
10612 MIRROR_TOGGLE Toggle mirroring
10613 NCBFRAME_RESET_MASK RESET response of global basic frame
10615 NCBFRAME_POWERON_MASK POWER ON response of global basic frames
10617 FRAME_SAVE_MASK Response of frames to subroutine return jump with
SAVE
10650 IPO_PARAM_NAME_TAB Name of interpolation parameters
10660 INTERMEDIATE_POINT_NAME_TAB Name of intermediate point coordinates for G2/G3
11640 ENABLE_CHAN_AX_GAP Channel axis gaps allowed
18600 MM_FRAME_FINE_TRANS Fine offset for all settable FRAMES and the basic
frame
18601 MM_NUM_GLOBAL_USER_FRAMES Number of globally predefined user frames
18602 MM_NUM_GLOBAL_BASE_FRAMES Number of global basic frames
To Next Page
Loading...
Need help?
General
