Siemens SIMATIC S7-300 Module data Reference Manual

Contents
xxv
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
of the Analog Value within the Range of Values 4-32 . . . . . . . . . . . . . . . . . . . . . .
4-40 Behavior of the Analog Output Modules as a Function of the Position
of the Analog Value within the Range of Values 4-33 . . . . . . . . . . . . . . . . . . . . . .
4-41 Parameters of the Analog Input Modules 4-40 . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-42 Parameters of the Analog Output Modules 4-43 . . . . . . . . . . . . . . . . . . . . . . . . . .
4-43 Parameters of the Analog Input/Output Modules 4-44 . . . . . . . . . . . . . . . . . . . . .
4-44 Options for Compensation of the Reference Junction Temperature 4-59 . . . . .
4-45 Ordering Data of the Comparison Point 4-63 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-46 Diagnostic Messages of the Analog Input Modules 4-72 . . . . . . . . . . . . . . . . . . .
4-47 Diagnostics Messages of the Analog Output Modules 4-73 . . . . . . . . . . . . . . . .
4-48 Diagnostics Messages of the Analog Input Modules, Causes of Errors
and Remedial Measures 4-73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-49 Diagnostics Messages of the Analog Output Modules, Causes of Errors
and Remedial Measures 4-74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-50 Parameters of the SM 331; AI 8 x 16 bits 4-81 . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-51 Assignment of Channels of the SM 331; AI 8 x 16 bits
to Channel Groups 4-82 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-52 Measuring Ranges of the SM 331; AI 8 x 16 bits 4-83 . . . . . . . . . . . . . . . . . . . . .
4-53 Minimum Possible Upper and Lower Limit Values of SM 331;
AI 8 x 16 bits 4-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-54 Parameters of the SM 331; AI 8 x 16 bits 4-90 . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-55 Assignment of the channels of the isolated analog input module SM 331;
AI 8 x 16 bits to channel groups 4-91 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-56 Scan times in 8-channel mode 4-93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-57 Measuring ranges of the SM 331; AI 8 x 16 bits 4-95 . . . . . . . . . . . . . . . . . . . . .
4-58 Content of the 4 bytes with additional information from
OB40 during a hardware interrupt or an end-of-scan-cycle interrupt 4-96 . . . .
4-59 Default Settings of the SM 331; AI 8 x 14 bits
High Speed using Measuring Range Modules 4-103 . . . . . . . . . . . . . . . . . . . . . . .
4-60 Parameters of the SM 331; AI 8 x 14 bits High Speed 4-104 . . . . . . . . . . . . . . .
4-61 Assignment of the channels of the SM 331; AI 8 x 14 bits High Speed to
channel groups 4-105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-62 Measuring Ranges of the SM 331; AI 8 x 14 bits High Speed 4-106 . . . . . . . . . .
4-63 Parameters of the SM 331; AI 8 x 13 bits 4-113 . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-64 Default Settings of the SM 331; AI 8 x 12 bits
Using Measuring Range Modules 4-120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-65 Parameters of the SM 331; AI 8 x 12 bits 4-120 . . . . . . . . . . . . . . . . . . . . . . . . . .
4-66 Assignment of Channels of the SM 331; AI 8 x 12 bits
to Channel Groups 4-121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-67 Measuring Ranges of the SM 331; AI 8 x 12 bits 4-123 . . . . . . . . . . . . . . . . . . . .
4-68 Parameters of the SM 331; AI 8 x RTD 4-129 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-69 Assignment of Channels of the SM 331; AI 8 x RTD to Channel Groups 4-131
4-70 Scan Times in “Software Filter, 8 Channels” Mode 4-134 . . . . . . . . . . . . . . . . . . .
4-71 Measuring ranges of the SM331; AI 8 x RTD 4-136 . . . . . . . . . . . . . . . . . . . . . . . .
4-72 Content of the 4 bytes with additional information from OB40
during a hardware interrupt or an end-of-scan-cycle interrupt 4-137 . . . . . . . . . .
4-73 Parameters of the SM 331; AI 8 x TC 4-143 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-74 Assignment of Channels of the SM 331; AI 8 x TC to Channel Groups 4-145 . .
4-75 Scan Times in “Software Filter, 8 Channels” Mode 4-148 . . . . . . . . . . . . . . . . . . .
4-76 Measuring Ranges of the SM331; AI 8 x TC 4-150 . . . . . . . . . . . . . . . . . . . . . . . .
4-77 Minimum Possible Upper and Lower Limit Values of SM 331;
AI 8 x TC in 5C 4-151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-78 Minimum Possible Upper and Lower Limit Values of SM 331;
AI 8 x TC in 5F 4-152 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)