Siemens SIMATIC S7-300 Module data Reference Manual

Contents
xxvi
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
4-79 Content of the 4 bytes with additional information from
OB40 during a hardware interrupt or an end-of-scan-cycle interrupt 4-152 . . . .
4-80 Default Settings of the SM 331; AI 2 x 12 bits
Using Measuring Range Module 4-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-81 Parameters of the SM 331; AI 2 x 12 bits 4-158 . . . . . . . . . . . . . . . . . . . . . . . . . .
4-82 Measuring Ranges of the SM 331; AI 2 x 12 bits 4-161 . . . . . . . . . . . . . . . . . . . . .
4-83 Output Ranges of the Analog Output Module SM 332; AO 8 x 12 bits 4-168 . . .
4-84 Output Ranges of the Analog Output Module SM 332; AO 4 x 16 bits 4-175 . .
4-85 Output Ranges of the Analog Output Module SM 332; AO 4 x 12 bits 4-181 . . .
4-86 Output Ranges of the Analog Output Module SM 332; AO 2 x 12 bits 4-187 . . .
4-87 Measuring ranges of the SM 334;AI 4/AO 2 x 12 bits 4-199 . . . . . . . . . . . . . . . . .
4-88 Output ranges of the SM 334;AI 4/AO 2 x 12 bits 4-200 . . . . . . . . . . . . . . . . . . .
5-1 Special signal modules: Characteristics at a Glance 5-2 . . . . . . . . . . . . . . . . . .
5-2 Meaning of the switch settings of the dummy module DM 370 5-6 . . . . . . . .
5-3 Parameters of the SM 338; POS-INPUT 5-14 . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4 SM 338; POS-INPUT: Input Addresses 5-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-5 Diagnostic messages of the SM 338; POS INPUT 5-18 . . . . . . . . . . . . . . . . . . .
5-6 Diagnostics Messages of the SM 338, Causes of Errors and Remedial
Measures 5-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-1 Interface Modules: Characteristics at a Glance 6-2 . . . . . . . . . . . . . . . . . . . . . .
7-1 Maximum Cable Length of a Segment 7-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-2 Maximum Cable Length between Two RS 485 Repeaters 7-2 . . . . . . . . . . . . .
7-3 Description and Functions of the RS 485 Repeater 7-3 . . . . . . . . . . . . . . . . . . .
8-1 SIMATIC TOP connect/... TPA: ConnecModules 8-3 . . . . . . . . . . . . . . . . . . . . .
8-2 Sequence of Steps for Wiring SIMATIC TOP connect/... TPA 8-4 . . . . . . . . .
8-3 Wiring Rules for Connecting the Supply Voltage 8-7 . . . . . . . . . . . . . . . . . . . .
8-4 Assignment of Connecting Cable Terminals to Address Bytes
of 32-Channel Digital Modules 8-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-5 Components of SIMATIC TOP connect 8-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-6 Selection for SIMATIC TOP connect Components 8-13 . . . . . . . . . . . . . . . . . . .
8-7 Connection Notes for SIMATIC TOP connect
with One-Conductor Connection 8-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-8 Terminal Assignments of the Terminal Block
for One-Conductor Connection 8-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-9 Connection Notes for SIMATIC TOP connect
with Three-Conductor Connection 8-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-10 Terminal Assignments of the Terminal Block
for Three-Conductor Connection 8-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-11 Connection Notes for SIMATIC TOP connect with 2A Module Connection 8-18
8-12 Terminal Assignments of the Terminal Block for 2A Modules 8-18 . . . . . . . . . . .
8-13 Components for SIMATIC TOP connect TPA 8-20 . . . . . . . . . . . . . . . . . . . . . . .
8-14 Terminal Assignment of the Terminal Block
of SIMATIC TOP connect TPA 8-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-1 SFCs for assigning Parameters to Signal Modules A-2 . . . . . . . . . . . . . . . . . .
A-2 Parameters of the Digital Input Modules A-3 . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-3 Parameters of the Digital Output Modules A-5 . . . . . . . . . . . . . . . . . . . . . . . . . .
A-4 Parameters of the Analog Input Modules A-7 . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-5 Codes for Interference Suppression of the Analog Input Modules A-9 . . . . . .
A-6 Codes for the Measuring Ranges of the Analog Input Modules A-9 . . . . . . . .
A-7 Parameters of the SM 331; AI 8 x RTD A-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-8 Codes of Operating Modes of the SM 331; AI 8 x RTD A-16 . . . . . . . . . . . . . . .
A-9 Interference Frequency Suppression Codes for SM 331; AI 8 x RTD A-16 . . .
A-10 Codes for the Measuring Ranges of the SM 331; AI 8 x RTD A-16 . . . . . . . . .
A-11 Codes of Temperature Coefficients of the SM 331; AI 8 x RTD A-18 . . . . . . . .
A-12 Codes Smoothing of the SM 331; AI 8 x RTD A-18 . . . . . . . . . . . . . . . . . . . . . . .

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)