SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
104
0 Switch off detecting SIM card
1 Switch on detecting SIM card
Reference Note:
User should select 8-pin SIM card holder
to implement SIM card
detection function.
After plug out simcard,User should wait 2 seconds ,then plug in SIM
card.
5.2.21 AT+CSMINS SIM Inserted Status Reporting
AT+CSMINS SIM Inserted Status Reporting
Test Command
AT+CSMINS=?
Response
+CSMINS: (list of supported <n>s)
OK
Read Command
AT+CSMINS?
Response
+CSMINS: <n>,<SIM inserted>
OK
Write Command
AT+CSMINS=<n>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
+CSMINS: <n>,<SIM inserted>
Parameters <n>
A numeric parameter to show an unsolicited event code indicating
whether the SIM has been inserted or removed.
0 Disable
1 Enable
<SIM inserted>
A numeric parameter which indicates whether SIM card
has been inserted.
0 Not inserted
1 Inserted
Reference
5.2.22 AT+CSGS Netlight Indication of GPRS Status
AT+CSGS Netlight Indication of GPRS Status
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English