SIM5300E AT Command Manual V1.02
<reqlength> Requested number of data bytes (1-1460)to be read
<cnflength> Confirmed number of data bytes to be read, which may be less
than <length>. 0 indicates that no data can be read.
<error>
61 Net error
62 DNS error
63 Connect error
64 Timeout
65 Server error
66 Operation not allow
70 Replay error
71 User error
72 Password error
73 Type error
74 Rest error
75 Passive error
76 Active error
77 Operate error
78 Upload error
79 Download error
80 Quit error
Reference
Note
When "+FTPGET:1,1" is shown, “AT+FTPGET:2,<reqlength>” can be used to
read data. If the module still has unread data, "+FTPGET:1,1" will be shown
again in a certain time.
11.2.15 AT+FTPPUT Upload File
AT+FTPPUT Upload File
Test Command
AT+FTPPUT=?
Response
OK
To Next Page
Loading...
