SIM5300E AT Command Manual V1.02
11.1 Overview
Command Description
AT+FTPPORT SET FTP PORT
AT+FTPMODE SET ACTIVE OR PASSIVE FTP MODE
AT+FTPTYPE SET FTP TRANSFER TYPE
AT+FTPPUTOPT SET FTP PUT TYPE
AT+FTPCID SET FTP BEARER PROFILE IDENTIFIER
AT+FTPREST SET RESUME BROKEN DOWNLOAD
AT+FTPSERV SET FTP SERVER ADDRESS
AT+FTPUN SET FTP USER NAME
AT+FTPPW SET FTP PASSWORD
AT+FTPGETNAME SET DOWNLOAD FILE NAME
AT+FTPGETPATH SET DOWNLOAD FILE PATH
AT+FTPPUTNAME SET UPLOAD FILE NAME
AT+FTPPUTPATH SET UPLOAD FILE PATH
AT+FTPGET DOWNLOAD FILE
AT+FTPPUT UPLOAD FILE
AT+FTPDELE DELETE REMOTE FILE
AT+FTPSIZE GET THE SIZE OF SPECIFIED FILE ON THE REMOTE MACHINE
AT+FTPSTATE GET FTP CURRENT STATE
AT+FTPEXTPUT EXTEND UPLOAD FILE
AT+FTPMKD MAKE DIRECTORY ON THE REMOTE MACHINE
AT+FTPRMD
REMOVE DIRECTORY ON THE REMOTE MACHINE
AT+FTPLIST LIST CONTENTS OF DIRECTORY ON THE REMOTE MACHINE
AT+FTPEXTGET DOWNLOAD FILE FROM THE REMOTE MACHINE TO FLASH
AT+FTPETGET DOWNLOAD FILE
AT+FTPETPUT UPLOAD FILE
AT+FTPQUIT QUIT FTP TRANSFER SESSION
AT+FTPRENAME RENAME THE SPECIFIED FILE ON THE REMOTE MACHINE
AT+FTPMDTM
GET THE LAST MODIFICATION TIMESTAMP OF SPECIFIED FILE ON THE
REMOTE MACHINE
11.2 Detailed Descriptions of Commands
11.2.1 AT+FTPPORT Set FTP Port
AT+FTPPORT Set FTP Port
To Next Page
Loading...
