SimCom SIM5300E

SIM5300E AT Command Manual V1.02
174
Reference
7.2.32 AT+CIPHEXS Set Output-data Format with suffix
AT+CIPHEXS Set Output-data Format with suffix
Test Command
AT+CIPHEXS=?
Response
+CIPHEXS: (list of supported <mode>s)
OK
Read Command
AT+CIPHEXS?
Response
+CIPHEXS: <mode>
OK
Write Command
AT+CIPHEXS=<mode>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <mode>
0 The default format of output data
1 Set the output data with suffix”0d 0a”.
2 Set the output data in HEX format with suffix “0d 0a”.
Reference Note:
This command is only available when”AT+CIPHEAD=1”
7.2.33 AT+CIPSSL Enable TCP SSL function
AT+CIPSSL Enable TCP SSL function
Test Command
AT+CIPSSL=?
Response
+CIPSSL: (0-1)
OK
Read Command
AT+CIPSSL?
Response
+ CIPSSL: <n>
OK
Write Command
AT+CIPSSL=<n>
Response
OK
Parameters <n>
0 Enable SSL function
SIMCOM CONFIDENTIAL FILE