SimCom SIM5300E

SIM5300E AT Command Manual V1.02
11
TA returns to data mode from command mode CONNECT <text>
Note: <text> only if parameter setting ATX>0
Reference V.25 te r
2.2.10 ATQ Set Result Code Presentation Mode
ATQ Set Result Code Presentation Mode
Execution Command
ATQ<n>
Response
This parameter setting determines whether or not the TA transmits any result
code to the TE. Information text transmitted in response is not affected by
this setting.
If <n>=0:
OK
If <n>=1:
(null)
Parameters <n>
0 TA transmits result code
1 Result codes are suppressed and not transmitted
ReferenceV.25ter
2.2.11 ATS0 Set Number of Rings before Automatically Answering
the Call
ATS0 Set Number of Rings before Automatically Answering the Call
Read Command
ATS0?
Response
<n>
OK
SIMCOM CONFIDENTIAL FILE