SIM5300E AT Command Manual V1.02
AT+CIPUDPMODE UDP extended mode
AT+CIPRXGET Get data from network manually
AT+CIPRDTIMER Set remode delay timer
AT+CIPSGTXT Select GPRS PDP context
AT+CIPOPTION Set TCP Option
AT+CIPSENDHEX Set CIPSEND Data Format to Hex
AT+CIPHEXS Set CIPSEND Data Format with suffix
AT+CIPSSL Enable TCP SSL function
7.2 Detailed Descriptions of Commands
7.2.1 AT+CIPMUX Start Up Multi-IP Connection
AT+CIPMUX Start Up Multi-IP Connection
Test Command
AT+CIPMUX=?
Response
+CIPMUX: (list of supported<n>s)
OK
Read Command
AT+CIPMUX?
Response
+CIPMUX: <n>
OK
Write Command
AT+CIPMUX=<n>
Response
OK
Parameters <n>
0 Single IP connection
1 Multi IP connection
Reference Note:
Only in IP initial state, AT+CIPMUX=1 is effective;
Only when multi IP connection and GPRS application are both shut
down, AT+CIPMUX=0 is effective.
7.2.2 AT+CIPSTART Start Up TCP or UDP Connection
AT+CIPSTART Start Up TCP or UDP Connection
To Next Page
Loading...
Need help?
General
