SimCom SIM5300E

SIM5300E AT Command Manual V1.02
30
64 dedicated packet access
128 dedicated PAD access
<status>
0 Not active
1 Active
Reference
3GPP TS 27.007
3.2.7 AT+CEER Extended Error Report
AT+CEER Extended Error Report
Test Command
AT+CEER=?
Response
+CEER: (list of supported <n>s)
OK
Read Command
AT+CEER?
Response
+CEER: <n>
OK
Write Command
AT+CEER=<n>
Response
OK
Execution Command
AT+CEER
Response
In case of CC and SM categories:
+CEER: <category>
OK
In case of SS category network error cause and network GSM cause.
+CEER: <cause>
OK
Parameters <n>
0 The reason for last call release as text code
1 The reason for last call release as number code
<category> may be
"No report available"
"CC setup error"
"CC modification error"
"CC release"
"SM attach error"
"SM detach"
SIMCOM CONFIDENTIAL FILE