SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
187
1-319488(bytes), the max value is due to the module used.
<data_len> The actual length for data output.
Reference Note
10.2.7 AT+HTTPSTATUS Read HTTP Status
AT+HTTPSTATUS Read HTTP Status
Test Command
AT+HTTPSTATUS=?
Response
OK
Read Command
AT+HTTPSTATUS?
Response
+HTTPSTATUS: <mode>,<status>,<finish>,<remain>
OK
Parameters <mode>
GET
POST
HEAD
<status>
0 idle
1 receiving
2 sending
<finish>
The amount of data which have been transmitted.
<remain>
The amount of data remaining to be sent or received.
11. AT Commands for FTP Application
SIM5300E has an embedded TCP/IP stack that is driven by AT commands and enables the host application to
easily access the Internet FTP service. This chapter is a reference guide to all the AT commands and responses
defined for using with the TCP/IP stack in FTP Service.
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English