SimCom SIM5300E

SIM5300E AT Command Manual V1.02
81
using unsolicited result codes defined in <mt>=2. Messages of
other classes result in indication as defined in <mt>=1.
<bm> (the rules for storing recei
ved CBMs depend on its data coding
scheme (refer GSM 03.38 [2]), the setting of Select CBM Types (+CSCB) and
this value):
0 No CBM indications are routed to the TE.
2
New CBMs are routed directly to the TE using unsolicited
result code: +CBM: <length><CR>
<LF><pdu> (PDU mode
enabled) or +CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data> (text
mode enabled).
<ds>
0 No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-
REPORTs are routed to the TE using unsolicited
result code: +CDS:<length><CR><LF><
pdu> (PDU mode
enabled) or +CDS:<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
(text mode enabled).
<bfr>
0
TA buffer of unsolicited result codes defined within this
Command is flushed to the TE when <mode> 1...3 is entered
(OK response shall be given before flushing the codes).
1
TA buffer of unsolicited result codes defined within this
command is cleared when <mode> 1…3 is entered
Reference
3GPP TS 27.005
4.2.9 AT+CPMS Preferred SMS Message Storage
AT+CPMS Preferred SMS Message Storage
Test Command
AT+CPMS=?
Response
+CPMS: (list of supported <mem1>s),(list of supported <mem2>s),(list of
supported <mem3>s)
OK
If error is related to ME functionality:
+CMS ERROR <err>
SIMCOM CONFIDENTIAL FILE