SIM5300E AT Command Manual V1.02
11.2.28 AT+FTPMDTM Get the Last Modification Timestamp of
Specified File on the Remote Machine
AT+FTPMDTM Get the Last Modification Timestamp of Specified File on the Remote Machine
Test Command
AT+FTPMDTM=?
Response
OK
Execution Command
AT+FTPMDTM
Response
If success:
OK
+FTPMDTM:1,0,<timestamp>
If failed:
OK
+FTPMDTM:1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <error> See "AT+FTPGET"
<timestamp> The last modification timestamp of the specified file.
Reference
Note:
The file is specified by the "AT+FTPGETNAME" and "AT+FTPGETPATH"
commands.
12. AT Commands for NTP
12.1 Overview
12.2 AT Commands for NTP
AT+CNTP Set NTP Parameters and Get Network Time
Test Command
AT+CNTP=?
Response
OK
To Next Page
Loading...
