SIM5300E AT Command Manual V1.02
Write Command
AT+CMMSRECV=<index>
Response
+CMMSRECV: "<sender>","<time>","<subject>",<size><CR><LF>
list of <fileIndex,name,type,filesize><CR><LF>
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<index> The index of the push message saved in the SIM message box.
<sender> The address of the sender
<time> The time to receive the MMS
<subject> the title of the MMS
<size> The size of the MMS
<fileIndex,name,type,filesize>
The index, name and size of every file
included in the MMS. The types are defined as following.
2 text
3 text/html
4 text/plain
5 image
6 image/gif
7 image/jpg
8 image/tif
9 image/png
10 smil
Reference
Note:
This command is valid only when it is not allowed to edit MMS and
the buffer for MMS will be clear up. So it is recommended to save
the MMS in the buffer before receiving MMS.
The received MMS is just saved in the buffer but not saved in the
flash.
13.2.16 AT+CMMSVIEW Get the MMS into buffer and show the
information
AT+CMMSVIEW Get the MMS into buffer and show the information
Test Command
AT+CMMSVIEW=?
Response
OK
To Next Page
Loading...
