SIM5300E AT Command Manual V1.02
Reference Note
Write command returns address provided by the network if a connection
has been established.
6.2.8 AT+CGCLASS GPRS Mobile Station Class
AT+CGCLASS GPRS Mobile Station Class
Test Command
AT+CGCLASS=?
Response
+CGCLASS: (list of supported <class>s)
OK
Read Command
AT+CGCLASS?
Response
+CGCLASS: <class>
OK
Write Command
AT+CGCLASS=<class>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <class>
A string parameter(string should be included in quotation marks)
which indicates the GPRS mobile class (in descending order of
functionality)
B Class-B mode of operation (A/Gb mode), (not applicable in Iu
mode) MT would operate PS and CS services but not
simultaneously
CG Class C in GPRS only mode
CC Class C in circuit switched only mode (lowest)
Reference Note:
It only supports Class B, CG and CC.
6.2.9 AT+CGREP Control Unsolicited GPRS Event Reporting
AT+CGEREP Control Unsolicited GPRS Event Reporting
Test Command
AT+CGEREP=?
Response
+CGEREP: (list of supported <mode>s) ,(list of supported <bfr>s)
OK
To Next Page
Loading...
