SimCom SIM5300E

SIM5300E AT Command Manual V1.02
26
in conjunction with asynchronous non-
transparent UDI or RDI
service in order to get FTM)
84
64000 bps (X.31 flag stuffing; this setting can be used in
conjunction with asyn-chronous non-
transparent UDI
service in order to get FTM)
115 56000 bps (bit transparent)
116 64000 bps (bit transparent)
120 32000 bps (PIAFS32k)
121 64000 bps (PIAFS64k)
130 28800 bps (multimedia)
131 32000 bps (multimedia)
132 33600 bps (multimedia)
133 56000 bps (multimedia)
134 64000 bps (multimedia)
<name>
0 Data circuit asynchronous (UDI or 3.1 kHz modem)
1 data circuit synchronous (UDI or 3.1 kHz modem)
4 Data circuit asynchronous (RDI)\
5 data circuit synchronous (RDI)
<ce>
0 Transparent
1 Non-transparent
2 Both, transparent prefered
3 Both, non-transparent prefered
Reference
3GPP TS 27.007 [14]
Note:
GSM 02.02[1]: lists the allowed combinations of the sub parameters.
3.2.5 AT+CCFC Call Forwarding Number and Conditions Control
AT+CCFC Call Forwarding Number and Conditions Control
Test Command
AT+CCFC=?
Response
+CCFC: (list of supported <reason>s)
OK
Write Command
AT+CCFC=<reason>,
<mode>[,<number>
[,<type>[,<class>[,<subaddr>[,
<satype>[,time]]]]]]
Response
TA controls the call forwarding supplementary service.Registration,erasure,
activation, deactivation, and status query are supported.Only ,<reads> and
<mode> should be entered with mode (0-2,4)
If <mode>≠2 and Command successful
OK
SIMCOM CONFIDENTIAL FILE