SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
38
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks
password in MT
power-
up and when this lock command issued)
Correspond to PIN1 code.
"FD" SIM card or active application in the UICC (GSM or USIM)
fixed dialling memory feature (if PIN2 authentication has not
been done during the current session, PIN2 is required as
<passwd>)
<mode>
0 unlock
1 lock
2 query status
<passwd> String type (Shall be the same as password specified for the
facility from the MT user interface or with command Change Password
+CPWD)
<class>
1 Voice (telephony)
2 Data refers to all bearer services; with <mode>=2 this
may refer only to some bearer service if TA does not
support values 16, 32, 64 and 128)
4 Fax (facsimile services)
7 All classes
<status>
0 Not active
1 Active
Reference
3GPP TS 27.007 [14]
Note:
CME errors if SIM not inserted or PIN is not entered.
3.2.18 AT+CLIP Calling Line Identification Presentation
AT+CLIP Calling Line Identification Presentation
Test Command
AT+CLIP=?
Response
+CLIP: (list of supported <n>s)
OK
Read Command
AT+CLIP?
Response
+CLIP: <n>, <m>
OK
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English