SimCom SIM5300E

SIM5300E AT Command Manual V1.02
35
Execution Command
AT+CIMI
Response
TA returns <IMSI>for identifying the individual SIM which is attached to ME.
<IMSI>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <IMSI> International Mobile Subscriber Identity (string without double
quotes)
Reference
3GPP TS 27.007 [13]
3.2.16 AT+CLCC List Current Calls of ME
AT+CLCC List Current Calls of ME
Test Command
AT+CLCC=?
Response
+CLCC: (list of supported <n>s)
OK
Read Command
AT+CLCC?
Response
+CLCC: <n>
OK
Write Command
AT+CLCC=<n>
Response
OK
Execution Command
AT+CLCC
Response
TA returns a list of current calls of ME.
Note: If Command succeeds but no calls are available, no information
response is sent to TE.
[+CLCC: <id1>,<dir>,<stat>,<mode>,<mpty>[,<number>,<type
>,<alphaID>]
[<CR><LF>+CLCC: <id2>,<dir>,<stat>,<mode>,<mpty>
[,<number>,<type>,<alphaID>][...]]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <n>
0
Don’t report a list of current calls of ME automatically when
the current call status changes.
SIMCOM CONFIDENTIAL FILE