SimCom SIM5300E

SIM5300E AT Command Manual V1.02
211
Parameters <Gateway> IP address of MMS proxy.
<Port> Port of MMS proxy.
Reference Note
13.2.3 AT+CMMSCID Set the Network Parameters for MMS
AT+CMMSCID Set the network parameters for MMS
Test Command
AT+CMMSCID=?
Response
+CMMSCID: (1-3)
OK
Read Command
AT+CMMSCID?
Response
+CMMSCID: <value>
OK
Write Command
AT+CMMSCID=
<value>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <value> network parameters, refer to AT+SAPBR
Reference Note
13.2.4 AT+CMMSSENDCFG Set the Parameters for sending MMS
AT+CMMSSENDCFG Set the parameters for sending MMS
Test Command
AT+CMMSSENDCFG=?
Response
+CMMSSENDCFG: (0-6), (0-3),(0,1), (0,1),(0-2),(0-4),(1-2),(0,1)
OK
Read Command
AT+CMMSSENDCFG?
Response
+CMMSSENDCFG:
<valid>,<pri>,<sendrep>,<readrep>,<visible>,<class>,<subctrl>,<notifrspche
ck>
OK
SIMCOM CONFIDENTIAL FILE