SimCom SIM5300E

SIM5300E AT Command Manual V1.02
201
Reference Note:
 The created folder is specified by the "AT+FTPGETPATH" command.
11.2.21 AT+FTPRMD Remove Directory on the Remote Machine
AT+FTPRMD Remove Directory on the Remote Machine
Test Command
AT+FTPRMD=?
Response
OK
Execution Command
AT+FTPRMD
Response
If success:
OK
+FTPRMD:1,0
If failed:
OK
+FTPRMD:1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter <error> See "AT+FTPGET"
Reference Note
 The created folder is specified by the "AT+FTPGETPATH" command.
11.2.22 AT+FTPLIST List Contents of Directory on the Remote
Machine
AT+FTPLIST List Contents of Directory on the Remote Machine
Test Command
AT+FTPLIST=?
Response
OK
SIMCOM CONFIDENTIAL FILE