SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
157
Execution Command
AT+CSTT
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <apn> A string parameter which indicates the GPRS access point name
<user name> A string parameter which indicates the GPRS user name
<password> A string parameter which indicates the GPRS password
Reference Note:
The write command and execution command of this command is valid
only at the state of IP INITIAL. After this command is executed, the state
will be changed to IP START.
7.2.10 AT+CIICR Bring Up Wireless Connection with GPRS
AT+CIICR Bring Up Wireless Connection with GPRS
Test Command
AT+CIICR=?
Response
OK
Execution Command
AT+CIICR
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Reference Note:
AT+CIICR only activates moving scene at the status of IP START, after
operating this Command is executed, the state will be changed to IP
CONFIG.
After module accepts the activated operation, if it is activated
successfully, module state will be changed to IP GPRSACT, and it
responds OK, otherwise it will respond ERROR.
7.2.11 AT+CIFSR Get Local IP Address
AT+CIFSR Get Local IP Address
Test Command
AT+CIFSR=?
Response
OK
Execution Command
AT+CIFSR
Response
<IP address>
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English