SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
52
Reference
3GPP TS 27.007
GSM 11.11
3.2.31 AT+CSQ Signal Quality Report
AT+CSQ Signal Quality Report
Test Command
AT+CSQ=?
Response
+CSQ: (list of supported <rssi>s),(list of supported <ber>s)
OK
Execution Command
AT+CSQ
Response
+CSQ: <rssi>,<ber>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Execution Com
mand returns received signal strength indication <rssi> and
channel bit error rate <ber> from the ME. Test Command returns values
supported by the TA.
Parameters <rssi>
0 -115 dBm or less
1 -111 dBm
2...30 -110... -54 dBm
31 -52 dBm or greater
99 not known or not detectable
<ber> (in percent):
0...7 As RXQUAL values in the table in GSM 05.08 [20] subclause
7.2.4
99 Not known or not detectable
Reference
3GPP TS 27.007 [13]
3.2.32 AT+VTD Tone Duration
AT+VTD Tone Duration
Test Command
AT+VTD=?
Response
+VTD: (list of supported <n>s)
OK
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English