SIM5300E AT Command Manual V1.02
AT+POP3CMD Get Multi-line Response
AT+POP3READ Read Multi-line Response
AT+POP3DEL Mark the Specific Email to Delete
AT+POP3RSET Unmark the Emails that Be Marked as Deleted
AT+POP3OUT Log Out POP3 Server
14.2 Detailed Descriptions for Email Application
14.2.1 AT+EMAILCID Set Email Bearer Profile Identifier
AT+EMAILCID Set Email Bearer Profile Identifier
Test Command
AT+EMAILCID=?
Response
+EMAILCID: (range of supported <cid>s)
OK
Read Command
AT+EMAILCID?
Response
+EMAILCID: <cid>
OK
Write Command
AT+EMAILCID=
<cid>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <cid> bearer profile identifier refer to AT+SAPBR
Reference
Note
14.2.2 AT+EMAILTO Set Timeout Value of SMTP/POP3 Server
Response
AT+EMAILTO Set Timeout Value of SMTP/POP3 Server Response
Test Command
AT+EMAILTO=?
Response
+EMAILTO: (range of supported <timeout>s)
OK
To Next Page
Loading...
Need help?
General
