SimCom SIM5300E - HTTP Application AT Commands

SIM5300E AT Command Manual V1.02
181
This command is applied to activate some applications such as HTTP, FTP.
10. AT Commands for HTTP Application
SIM5300E has an embedded TCP/IP stack that is driven by AT commands and enables the host application
to easily access the Internet HTTP service. This chapter is a reference guide to all the AT commands and
responses defined to use with the TCP/IP stack in HTTP Service.
10.1 Overview
Command Description
AT+HTTPINIT INITIALIZE HTTP SERVICE
AT+HTTPTERM TERMINATE HTTP SERVICE
AT+HTTPPARA SET HTTP PARAMETERS VALUE
AT+HTTPDATA INPUT HTTP DATA
AT+HTTPACTION HTTP METHOD ACTION
AT+HTTPREAD READ THE HTTP SERVER RESPONSE
AT+HTTPSTATUS READ HTTP STATUS
10.2 Detailed Descriptions of Commands
10.2.1 AT+HTTPINIT Initialize HTTP Service
AT+HTTPINIT Initialize HTTP Service
Test Command
AT+HTTPINIT=?
Response
OK
Execution Command
AT+HTTPINIT
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Reference Note:
HTTPINIT should first be executed to initialize the HTTP service.
SIMCOM CONFIDENTIAL FILE