SimCom SIM5300E

SIM5300E AT Command Manual V1.02
180
Write Command
AT+SAPBR=<cmd_type>,<ci
d>[,<ConParamTag>,<ConPa
ramValue>]
Response
OK
If<cmd_type>=2
+SAPBR: <cid>,<Status>,<IP_Addr>
OK
If <cmd_type>=4
+SAPBR: <ConParamTag>,<ConParamValue>
OK
Unsolicited Result Code
+SAPBR <cid>: DEACT
Parameters <cmd_type>
0 Close bearer
1 Open bearer
2 Query bearer
3 Set bearer parameters
4 Get bearer parameters
<cid> Bearer profile identifier
<Status>
0 Bearer is connecting
1 Bearer is connected
2 Bearer is closing
3 Bearer is closed
<ConParamTag> Bearer parameter
"CONTYPE" type of Internet connection. Value refers to
<ConParamValue_ConType>
"APN" Access point name string: maximum 50 characters
"USER" User name string: maximum 50 characters
"PWD" Password string: maximum 50 characters
<ConParamValue> Bearer paramer value
<ConParamValue_ConType>
"GPRS" GPRS connection.
<IP_Addr> The IP address of bearer
Reference Note:
SIMCOM CONFIDENTIAL FILE